ACS
OZW772 Web server,
RMZ792-B bus operator
unit
ETS
Notes
Connecting a KNX tool
94 / 132
Siemens
Building Technologies
3.14.2 Parameter setting/download via tool
The control parameters can be adjusted via bus either by parameter download
during commissioning or during normal operation with a tool like ACS.
With the ACS tool, the parameters can be changed...
– during commissioning via parameter download (all parameters)
– during operations via Popcard (most of the parameters)
Most parameters can be changed during operations using the OZW772 web server
or the RMZ792-B bus operator unit.
ETS is an engineering tool and can be used for the full commissioning of the RDG..
KNX room thermostats. Device address, application, and control parameters can
be defined and downloaded via ETS.
· Setting RDG.. KNX parameters is only supported by ETS4 or higher/ACS
version 5.11 (for RDG1..0KN), version 8.32 or higher (for RDG165KN) and
version V10.02.080 or higher (for RDG160KN with SW version
· The RDG.. KNX room thermostats (without ETS parameter download) require
version ETS4 or higher/ACS version 5.11 (for RDG1..0KN), version 8.32 or
higher (for RDG165KN) and version V10.02.080 or higher (for RDG160KN with
SW version
V1.14)
Connecting a KNX commissioning/operating tool to the RDG1..KN is described in
4.2.
RDG100KN, RDG160KN, RDG165KN Basic Documentation
V1.14)
CE1P3191en
2018-07-03