Compressor Applications (Rdg16 - Siemens RDG100KN Basic Documentation

Application for
compressors in DX-type
equipment
1-stage compressor
1-stage compressor with
reversing valve
1-stage compressor and
electric heater
(cooling only: disable
electric heater via P13)
1-stage compressor
for heating and cooling
2-stage compressor
Notes
64 / 132
Siemens
Building Technologies
3.6.10 Compressor applications (RDG16..KN)
For compressor applications,
· Set the corresponding basic application as per 3.4.
· Disable the fan (P52) or set the type of fan speed (P53)
· Select the type of control outputs (On/Off or DC 0...10 V, P46, P47)
The following applications are available:
Set basic application
2-pipe
2-pipe
2-pipe and electric heater
4-pipe
2-stage heating or cooling
· Minimum On/Off time:
· Fan operation:
· Fan speed:
· Control outputs On/Off:
Control outputs DC 0...10 V: P46 = 2 (V1) P47 = 2 (V2)
RDG100KN, RDG160KN, RDG165KN Basic Documentation
Section
0
0
0
6.3.2
3.6.4
3.6.6
3.6.8
P48/P49 (only with On/Off control outputs)
P52 (0 = disabled, 1 = enabled)
P53 (1 = 1-speed, 2 = 3-speed, 3 = DC 0...10 V)
P46 = 1 (V1) P47 = 1 (V2) (ECM/DC fan only)
Sequences
H ( \ )
C ( / )
H + C
El. H + H ( \ \ )
7
El. H + C ( \ / )
7
C ( / )
H + C ( \ / )
H + H ( \ \ )
C + C ( / / )
CE1P3191en
2018-07-03