ACS
Note!
STOP
108 / 132
Siemens
Building Technologies
5.2
ACS tool
The ACS tool commissions the RDG.. KNX room thermostats (physical address,
application, parameters). They can be operated or monitored via bus during normal
operation.
This section does not describe how the physical address is defined and only
provides a brief overview of ACS' main functionality.
For more information, refer to the ACS online help.
Setting RDG.. KNX parameters is only supported by ACS version 5.11 or
higher.
5.2.1
Parameter setting in ACS
In the ACS program, select Plant à Open to open the plant.
To start the parameter settings, select Applications à Plant engineering.
The application and control parameters can be adjusted and downloaded.
Column Line no. contains the parameter number as displayed in the parameter
table. See 3.14.
RDG100KN, RDG160KN, RDG165KN Basic Documentation
CE1P3191en
2018-07-03