Siemens RDG100KN Basic Documentation page 9

Siemens
Building Technologies
· Control 6-port ball valve as changeover (on/off – open/close signal) and combi
valve (PICV) DC 0...10V for
– Chilled and heated ceiling application (RDG160KN)
– Fan coil application (RDG160KN SW version
· Control of 6-port ball valve via KNX S-Mode objects (RDG160KN)
· Flow limitation function for combi valve (PICV) in heating mode (RDG160KN SW
version 2.04)
· Selectable relay functions ( RDG16..KN):
– Switching off external equipment during Protection mode
– Switching on external equipment (e.g. pump) during heating/cooling mode
– Output status heating/cooling sequence
– Dehumidification/humidification control output (RDG165KN)
· Reloading factory settings for commissioning and control parameters
· KNX bus (terminals CE+ and CE-) for communication with Synco or KNX
compatible devices
· Display of outside temperature or time of day via KNX bus
· Time scheduling and central control of setpoints via KNX bus
· Control of Economy setpoints via KNX bus (RDG16..KN)
· Energy supply optimization via energy demand signal with a Synco RMB795B
central control unit
RDG100KN, RDG160KN, RDG165KN Basic Documentation
2.04)
9 / 132
CE1P3191en
2018-07-03