Usb Interface; Connecting Terminals (Overview) - Advanced Energy THYRO-AX Manual

Thyristor power controller
Hide thumbs Also See for THYRO-AX:
Table of Contents

Advertisement

Available languages

Available languages

24

5.1.6 USB INTERFACE

When using the USB interface, e.g. for the use of the Thyro-Tool AX, the
special Advanced Energy USB cable has to be used between the PC and
Thyro-AX to avoid malfunctions.
The shorter part of the wiring cable (plug - filter, approx. 30 cm) has
to be connected to Thyro-AX while the longer part of the wiring cable
(filter - plug) has to be connected to the USB plug of the PC.

5.1.7 CONNECTING TERMINALS (OVERVIEW)

TERMINAL DESCRIPTION
X3
.1
root, common connection
.2
N/O contact, open when there is a fault
(closed circuit principle)
.3
N/C contact, closed when there is a fault
X22 .1
bus setpoint activation (factory setting)/
setpoint switchover
.2
TxD / connection to bus module
.3
RxD / connection to bus module / multi I/O 3 (In)
.4
control ground
.5
connection to slave power section
.6
connection to slave power section
.7
control ground
.8
analog output 3 0-10 V or 0(4)-20 mA
.9
multi I/O 1 (In/Out, default setting: In)
.10 external voltage transformer
.11 control ground
.12 external current transformer
.13 external current transformer
X2
.1
control ground
.2
pulse inhibition
.3
control ground
.4
analog - setpoint input 1, max. 10 V, max. 20 mA / multi I/O 4 (In)
.5
control ground
.6
sync. Out (internal mains load optimization) / multi I/O 2 (Out)
.7
sync. In (digital In, internal mains load optimization) / multi I/O 2 (In)
.8
+ 5V output, e.g. for a setpoint potentiometer
(5 kΩ ≤ R
≤ 10 kΩ)
Poti
.9
analog output 1, 0-10 V or 0(4)-20 mA
.10 ground potential, as may be shielded control cable
.11 analog - setpoint input 2, max. 10 V, max. 20 mA / multi I/O 5 (In)
.12 analog output 2, 0-10 V or 0(4)-20 mA
.13 control ground
X1
.1
auxiliary phase L2 / N
.2
auxiliary phase L2 / N
X4
.1
phase for additional electronics supply
.2
phase for additional electronics supply
.3
N for additional electronics supply
.4
N for additional electronics supply
X7
.2
phase for fan
.3
ground for fan
TAB. 1 CONNECTING TERMINALS (OVERVIEW)
25
GRID DI-
MENSION
5.08
3.5
3.5
3.5
3.5
3.5

Advertisement

Chapters

Table of Contents
loading

Table of Contents