Table of Contents
Advertisement
7.2 Pr int Methods
After generating the Gcode file, you can transfer it to your Finder. You can transfer the
file through USB cable and USB stick.
7.2.1 Pr int fr om Computer (USB connection)
①Connect your Finder with your PC via a USB cable.
②Turn on your Finder, level the build plate and load the filament.
③ Click
[Pr int]
transference, the printer will heat up automatically. And when heating finishes, the
print will start to build the model.
④When your PC connects with FlashPrint successfully. The status box on the
bottom right displays the real-time nozzle temperature. After finishing preheating,
your Finder starts the print job directly.
7.2.2 Pr int fr om Computer (WiFi connection)
①Connect your Finder with your PC via WiFi.(Please refer to 6.1.13)
②Turn on your Finder, level the build plate and load the filament.
③ Click
[Pr int]
transference, the printer will heat up automatically. And when heating finishes, the
printer will start to build the model.
Finder User Guide | www.flashforge.com
and transfer your Gcode file to your Finder. After completing
7-8
and transfer your Gcode file to your Finder. After completing
62
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Finder and is the answer not in the manual?
Questions and answers