FLASHFORGE 3D PRINTER Finder User Manual page 19

Finder User Guide | www.flashforge.com
Turn on/off [FlashFor ge Cloud]:
Tap to turn on/off

Connection.
Extruder Calibration
Adjust Z-axis to the right position and tap
[OK]
 +: The build plate elevates.
 -: The build plate descends.
OK: To save the setting and back to setting
menus.
 Back
The proper distance may be one ordinary
paper's thickness.
Note: Please do this oper ation after
contacting with our after -sale engineer .
Turn on/off [Star tup Sound]:
Tap to turn on/off the sound when restart

the printer.
Power Saving Mode On
The power saving mode status is turned
If there is no operation within half an hour,
the printer will automatically shut down.
(Power saving mode will not work in the
process of printing)
19
the FlashForge Cloud
on.