Table of Contents
Advertisement
and filament unload. Furthermore, if you want to stop filament load and unload, you
can click [Stop].
● Temperature Contr ol: Input the temperature you want to get in the left frame, click
[Apply], the printer will automatically heat the corresponding part, the right side
shows the current actual temperature of corresponding part. After starting heating, the
below curve of temperature form will start to change, different color correspond
different parts' temperatures
②Update Fir mwar e
Every time when you start FlashPrint, it will automatically detect and download the
up-to-date firmware. If any update is available, a dialog box will pop up for reminding
the users to update.
Step 1: Click
[Tools]--[Update fir mwar
e]. It needs to cut off connection before
updating firmware. If software and printer are already in connection, it reminds you
cutting off the connection, choose
[Yes]
and go on to the next step.
Step 2: Choose corresponding printer type and firmware version and click
[OK]
in the
firmware updating box. After confirming the printer is in free state, the software will
automatically update the firmware
6-24
Step 3 ：Reboot you Finder and wait for 4-5 seconds, then you can see the update
Finder User Guide | www.flashforge.com
57
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Finder and is the answer not in the manual?
Questions and answers