FLASHFORGE 3D PRINTER Finder User Manual page 48

①Pr eview: Choose to enter preview interface or not
②Pr int when slice done: Print or not when slice done
③Mater ial type: Choose according to the type of model
④Suppor ts: When print suspended structure models, support is necessary. Click
[suppor ts] to create support part for the printing.
⑤Raft: This function will help the model to stick well on the platform.
⑥Wall: During dual color printing, this function will help to clear the leaking
filament of another extruder.
⑦Br im: Expand the outline of model's bottom layers to a Brim which helps anchor
the edges of the model to the plate to avoid warping.
⑧Resolution：You have three resolution solution(with default setting)to choose from,
high resolution is corresponding with slow printing speed, opposite for the low
resolution. For PLA printing, an extra solution "Hyper" is available.
⑨Mor e options: Click
temperature. Different resolution solution is corresponding to different defaults, click
[Restor e Defaults]
Layer
●
a. Layer : Layer thickness of the printing model. With a small value, the surface
of the model will be smoother.
b. Fir st Layer Height: This is the first layer of the model, which will affect the
sticking performance between the model and platform. Maximize is 0.4mm, usually
the default is OK.
c. Shell: Contains the outside shell value, capping layer value (under vase pattern,
top solid layer setting is invalid).
Pr imeter Shells: Maximize is 10
●
Finder User Guide | www.flashforge.com
[Mor e options]
to back to default setting.
to set for layer, shell, infill, speed and
47