FLASHFORGE 3D PRINTER Finder User Manual page 56

6.2.14 Tool Menus
①Contr ol Panel
After connecting PC with Finder, click [Tools]--[Contr ol Panel] to open the control
panel.
6-23
● J og Contr ols
a . J og Mode： Select the distance that extruder/ build plate move a single time (that is,
the distance extruder/ build plate move upon your single click).
b . Six blue ar r ow dir ection button: Control the move along X/Y/Z axis. X/Y axis
button control extruder move, Z axis button control build plate move. Click X-,
extruder will move leftward a specified distance; Click X+, extruder will move a
specified distance rightward. Click Y-, extruder will move forward a specified distance;
Click Y-, extruder will move backward a specified distance. Click Z-, build plate will
move upward a specified distance; Click Z-, build plate will move downward a
specified distance. (Specified distance refers to the move distance you set in Jog Mode.
c . Stop: Click [Stop] button to abort the current movement.
d . XYZ coor dinate fr ame on the r ight side: Show the current position of
Finder User Guide | www.flashforge.com
55