FLASHFORGE 3D PRINTER Finder User Manual page 42

Method 2: Hold down the mouse wheel and scroll up and down.
Method 3: Hold down the
● Rotate
Click the [View] icon
methods:
Method 1. Hold down the right mouse button and drag.
Method 2. Hold down the
● Scale
Rotate the mouse wheel to enlarge or shrink the build plate.
②Set View
Allows users to view the object on the build plate. Six views are under the view menu,
that is, home view, bottom view, top view, front view, back view, left view and right
view.
Method 1: Click the the
Method 2: Click the the
will appear with six views for selecting.
③Reset View
Allow users to reset views by the following two methods:
Method 1: Click the
Method 2: Click the
viewing options, you can click [Reset].
④Show Model Outline
Click [View]--[Show Model
Finder User Guide | www.flashforge.com
Shift key, hold down the right mouse button and drag.
and then you can rotate the object by the following two
Shift key, hold down the left mouse button and drag.
[View] button, there are six views in the drop- down list
[Look] icon
[View] menu and select
[View] button on the left, click it again and you will see the
Outline], it will highlight the yellow border of the object
on the left, click it again and a submenu
[Home View]
41