FLASHFORGE 3D PRINTER Finder User Manual page 50

suspend automatically. The function usually applied when you want to change the
filament at a certain point.
(6-14) Click [Edit], then you can add or remove a height.
6.2.11 File Menus
①New Pr oject
Click [File]--[New Pr oject]
modification on previous project, then it will inform you whether the modification
needs to be saved or not. Click
abandon it. If click [Cancel]
②Saving
After finishing the model edit and adjustment, there are two ways below to save all
models in the scene.
Method 1:
Click [File]--[Save Pr oject]
".fpp"suffix, all models in the scene (include support) are independent . After
Finder User Guide | www.flashforge.com
6-14
can build a blank project. If there is an unsaved
[Yes] will save the modification, click
or close tool tip, then will cancel the new project.
6-15
in the menu bar to save the file as a project file with the
49
[No] will