Functions; Start Time Preselection; Anti-Crease Function - Hanseatic HWM 614 A3IT User Manual

Page GB-20

Functions

Functions
As well as the different cycles, the appliance
also has additional functions which you can
select as required.
To be able to select the additional functions,
you must have already selected a cycle.
Please note that
– not all additional functions are possible
with all cycles.
– an additional function cannot be selected if
the cycle is already in progress.
You can identify an additional function that
cannot be selected by the relevant signal
flashing quickly on the display (3). The signal
of this additional function will then turn off.

Start time preselection

Select this function if you want the wash cycle
to begin at a later time.
The start time preselection can be set in inter-
vals of 1 hour. The maximum start time prese-
lection is 23 hours.
Signal
0 0000
1h
°C °
Start time
Temp. Spin preselection
60°C
40°C
(19)
1. Press the 'Start time preselection' (19) sen-
sor button.
The signals and '1h' – i.e. the selected
cycle starts in one hour – will appear on the
display (3).
2. Press the 'Start time preselection' sensor
button enough times until the desired start
time is achieved.
3. Activate the start time preselection
by pressing any sensor button (5).
The signal will stay lit.
Functions
Anti- Start
crease Pause
To switch off the start time preselection,
turn the cycle selector (2) to the 'Off'
position. Select a new cycle as required.

Anti-crease function

Select this function to avoid deep creases in
your laundry.
The appliance will reduce the spin speed
by 200 to 600 rpm depending on the cycle
selected.
The duration of the cycle will increase by
approx. four minutes.
Signal
0 0000
244
° °C
Start time
Temp. Spin preselection
60°C
40°C
• Press the 'Anti-crease' (20) sensor button.
The signal will stay on the display (3).
The duration of the cycle will be extended
by approx. 4 minutes.
To de-select the anti-crease function,
press the 'Anti-crease' sensor button
again.
Functions
Anti- Start
crease Pause
(20)