Hanseatic HWM 614 A3IT User Manual page 72

Table of Contents

Advertisement

Available languages

Available languages

Page GB-32
Start-up
Aus
Extrakurz 15'
Kurz 60'
Hemden
Mix
Sport
Hand-/
Feinwäsche
Schleudern
Allergie
Duration of cycle (min.)
Wash step
Signal
0
0000
165
°C
°
Start time
Temp.
Spin
preselection
60°C
40°C
7. Set the cycle selector to the cycle
'
Cotton'.
The display shows the cycle duration.
The wash step signal and the Start/Pause
button flash.
8. Press the 'Start/Pause' (4)
sensor button.
The wash cycle begins. The display
shows the remaining cycle time as
well as the progress of the wash cycle:
Wash, rinse, spin. After the cycle has
finished, 'End' will appear on the display.
9. Wait until the locking time is over and the
loading door (7) is released with a click.
10. Open the loading door and pull the dis-
pensing drawer out slightly so that the
washing machine can dry off inside.
11. Turn the cycle selector back to the 'Off'
position to switch off the appliance.
12. Disconnect the mains plug from the
socket.
13. Close the valve.
Start-up is now finished.
Baumwolle
Baumwolle
Baumwolle
Eco 20°C
Pflegeleicht
Wolle
Spülen
Start/Pause
Functions
Anti-
Start
crease
Pause
(4)

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hwm 814 a3itHwm 714 a3itHwm 914 a3it

Table of Contents