Suspending The Cycle; Pumping Water; Cycle End - Hanseatic HWM 614 A3IT User Manual

Suspending the cycle

Off
Extra short 15'
Short 60'
Shirts
Mixed
Sports
Hand-/
delicate wash
Spin
Allergy
(2)
1. To suspend a running cycle, turn the cycle
selector (2) to the 'Off' position.
The wash cycle will stop and the laundry
will remain in the suds/rinse water.
2. To pump the water, please refer to the next
steps.

Pumping water

1. Turn the cycle selector to the 'Off' position.
2. Turn the cycle selector to any cycle.
The water is now pumped.
3. You can now switch off the appliance or
start any cycle.
Cotton Signal Functions
0 0000
Cotton
Cotton
° °C
Eco 20°C
Start time Anti- Start
Easy care
Temp. Spin preselection crease Pause
60°C
Wool
40°C
Rinse
Standard cycles

Cycle end

The appliance stops automatically as soon as
the selected cycle is finished.
1. If the 'End' signal appears on the display,
you can open the loading door and take out
the laundry.
2. Open the loading door and remove the
laundry from the drum.
3. Leave the loading door open and pull the
dispensing drawer out slightly so that the
appliance can dry off inside.
4. Turn the cycle selector (2) back to the 'Off'
position to switch off the appliance.
5. Disconnect the mains plug (8) from the
socket.
6. Close the valve.
Page GB-19