Start-Up; Transport; Removing/Installing Transport; Safety Devices - Hanseatic HWM 614 A3IT User Manual

Start-up

Possible residual water or drops in the
machine are merely a sign that the ap-
pliance was tested for functionality during pro-
duction.

Transport

CAUTION!
Risk of injury!
Improper handling of the appliance
may result in injury.
The appliance is very heavy. Never
■
transport or carry it alone, rather al-
ways with at least two persons.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
If a trolley is used to move the ap-
■
pliance, always lift the appliance as
shown on the packaging.
Always transport the appliance verti-
■
cally.
Only transport the appliance with
■
built-in transport safety devices.
• Check whether the paths of transport and
the installation location are suitable for the
weight of the appliance. If in doubt, ask
your landlord or property management.
Start-up

Removing/installing transport

safety devices

WARNING!
Risk of electric shock!
The appliance operates with dangerous
voltages. Touching live parts may result
in severe injury or death.
Make sure the appliance is not con-
■
nected to the power supply whilst the
transport safety devices are being re-
moved or installed.
NOTICE
Risk of damage!
Improper installation and set-up of the
appliance may result in damage.
Remove all transport safety devices
■
prior to installation.
Removing the transport safety
devices
1. Loosen the screws of the transport safety
devices (14) with a 10-mm spanner.
Page GB-27
(14)