Cleaning The Drum; Cleaning The Dispensing Drawer; Cleaning The Filter And Replacing The Gasket - Hanseatic HWM 614 A3IT User Manual

Page GB-24 Automatic control functions

Cleaning the drum

1. If you have used starch or fabric sizing,
wipe out the drum with a moist cloth.
2. After wiping, leave the loading door (7)
open to let moisture evaporate from the
inside.
Cleaning the dispensing
drawer
1. Pull the dispensing drawer (1) out as far
as possible.
2. Press the release spot (21) and pull the
dispensing drawer out completely.
3. Remove the insert (22).
(23)
4. Remove the cap (23).
5. Rinse the dispensing drawer, the insert and
the cap under running water.
6. Remove any leftover detergent in the draw-
er runner and compartments with a small
brush for dishes or bottles or a toothbrush.
(21)
7. Insert the cap (23) and insert (22) again
correctly.
(1)
8. Insert the dispensing drawer into the rins-
ing chamber and close it.
Cleaning the filter and
replacing the gasket
(22)
NOTICE
Risk of damage!
Improper handling of the appliance
can lead to water damage or damage
of the appliance.
Close the valve before cleaning the
■
fi lter or replacing the gaskets.
Check and clean fi lters and gaskets
■
regularly.
Replace defect fi lters and gaskets im-
■
mediately. Never operate the appli-
ance without fi lters and gaskets.
In the water inlet, the appliance contains fil-
ters that prevent foreign particles from pene-
trating the appliance.
(22)
(23)