Washing Process; Requirements; Starting The Cycle; Suspending And Continuing - Hanseatic HWM6T214A2 User Manual

Page EN-14

Washing process

Washing process

Requirements

– You have read the chapter "Safety" from
page EN-4 and understood all safety in-
structions.
– The transportation packaging is removed
and the appliance is prepared as described
in chapter 'Set up and connection' on
page EN-23.
– The water inlet hose (b) and water outlet
hose (14) have been properly fixed.

Starting the cycle

(2) (3)
Aus
Baumwolle
Extrakurz 15' 60°C
Anzeige
Kurz 60' Baumwolle 40°C 4
Jeans/
Baumwolle
Dunkle Kleidung
Mix Eco 20°C
Sport Pflegeleicht
Hand-/
Wolle
Feinwäsche
Schleudern/Abpumpen / / Spülen
Allergie
1. Select the desired wash cycle using the
cycle selector (2).
2. Make changes if necessary:
– To adjust the water temperature, press
the Temp. button (4) repeatedly until the
desired value is shown in the display (3).
– To adjust the spin speed, press the Spin
button (5) repeatedly until the desired
value is shown in the display (3).
3. If necessary, select additional options:
– To add prewash, select the Prewash
button (7).
The symbol will now flash under the
button.
– To add anti-crease, select the An-
ti-crease button (8).
The iron symbol will now flash under
the button. This function reduces the
spin speed during the last spin cycle so
that your laundry does not wrinkle as
much.
Not every cycle has all the adjustment
options and additional options available
(see page EN-11).
(4) (6) (8)
(5) (7) (9)
Funktionen k n k k
Schleudern Startzeit- Start/
Temp. vorwahl Vorwäsche Knitterschutz
Pause
4. Open the valve completely.
5. Press the Start/Pause button (9).
– The cycle starts.
– The Start/Pause
– The remaining cycle time is shown on
the display (3).
– The door is locked.

Suspending and continuing

the cycle

Please note that a long pause can affect the
wash result, as the soapy water cools down.
• If you want to stop the cycle, for example,
to put in additional washing, press the
Start/Pause button (9).
The Start/Pause button will flash during
the interruption.
Depending on the cycle's progress, the
door will either be released or remain
locked.
• Press the Start/Pause button (9) again to
continue the cycle.

Suspending/altering the cycle

1. Turn the cycle selector (2) to Off to inter-
rupt a cycle in progress or to select anoth-
er cycle.
This will stop the cycle.
2. Use the cycle selector (2) to select any
cycle.
The soapy water will now be drained.
3. Use the cycle selector (2) to select a new
cycle and add detergent if required.
4. Press the Start/Pause button (9) to start
the new cycle.
button stays on.