Washing Process; Requirements; Starting The Cycle; Suspending And Continuing - Hanseatic HWMB714A3 User Manual

Washing process

Requirements

– You have read the "Safety" chapter from
GB-4 and understand all the safety instruc-
tions .
– The transportation packaging is removed
and the appliance is prepared as described
in chapter "Installing and connecting the
washing machine" on page GB-23 .
– The inlet hose (b) and the outlet hose (15)
are properly connected .

Starting the cycle

1 . Switch on the device and select the wash-
ing cycle desired as described above .
2 . Open the valve completely .
Individuell
Zeit sparen
Hemden Baumwolle
Pflegeleicht Handwäsche
Startzeit-
vorwahl
Baby Comfort Sportwäsche
Jeans Express 15`
Temperatur
wahl
Mix Feines
Buntwäsche Wolle
U/Min
Abpumpen Spülen
Schleudern
3 . Press the Start/Pause button (9) .
– The cycle starts .
– You can identify the cycle status from
the remaining wash time (5) displayed,
as well as the flashing symbol (21) .
Pre-wash
Main wash
Rinse
Spin
– The door is locked (indicated by the pad-
lock symbol ) .
– You cannot adjust, select or deselect
settings while the cycle is active .
(5)
3 Sek . drücken für Individuell
Zeit sparen
Ein/Aus
Extra
Spülen
Vorwäsche
Start/Pause
3 Sek .
Tür Entriegelung
(21) (9)
Washing process

Suspending and continuing

the cycle

Please note that a long pause can affect the
wash result, as the suds cool down .
• If you would like to pause the active cycle,
e .g . to add laundry, press the Start/Pause
button (9) . The spin speed display will blink
while the cycle is paused .
You can only add laundry if the water
temperature and the water level per-
mits this (indicated by symbol
• To add laundry, you must first unlock the
door . Hold the Start/Pause button (9) for
approx . 3 seconds .
• The padlock symbol
the display; the door is now released and
you can add laundry .
• To continue the cycle, press the Start/
Pause button (9) again .

Suspending/altering the cycle

1 . To interrupt or amend an active cycle,
press the On/Off button (8) .
All indicators on the display disappear .
2 . Switch the appliance on again and set a
new cycle with the cycle selector (2) and
refill the washing detergent, if necessary .
3 . Start the new cycle with the Start/Pause
button (9) .
Page GB-15
) .
will disappear from