Selecting The Cycle - Hanseatic HWMB814C User Manual

Page EN-18

Selecting the cycle

Selecting the cycle
NOTICE
Always select the cycle before loading
the washing machine. Otherwise, the
loading sensor will not work.
1. Press the button (8) to switch the appli-
ance on.
All symbols on the display will illuminate
briefly. Then only the symbols and values
for the selected cycle will illuminate.
2. Choose the correct cycle for your laundry
from the cycle table on page EN-13 and se-
lect it using the cycle selector (2).
(2) (3) (4)
Startzeit-
vorwahl
Temperatur-
wahl
U/Min /M M M
(11)
3. If necessary, customise the selected cycle
to suit your laundry by adjusting the de-
fault settings using the buttons:
– "Temperature selection" (3)
– "Start time pre-selection" (4)
– "Time saving" (6)
– "Extra rinse" (7)
– "Pre-wash" (10)
– "RPM" (11)
Please see "Table Further options" on
page EN-17 for the available custom settings.
(6) (7) (8)
3 Sek. drücken für Individuell
Zeit sparen
Ein/Aus
Extra
Spülen
Vorwäsche ä äs
Start/Pause
3 Sek.
Tür Entriegelung
(10)