Otto Bock 3F1-1 Instructions For Use Manual page 24

1 Foreword
INFORMATION
Date of last update: 2017-08-11
► Please read this document carefully before using the product.
Instruct the user in the proper and safe use of the product.
►
► Please contact the manufacturer if you have questions about the product (e.g. regarding the
start-up, use, maintenance, unexpected operating behaviour or circumstances). Contact
information can be found on the back page.
► Please keep this document in a safe place.
The product "3F1=1 functional cosmesis C-Leg / 3F1=2 functional cosmesis Genium" is called
the product/functional cosmesis in the following.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
2 Product description
2.1 Design
The functional cosmesis consists of the following components (example 3F1=1):
2.2 Function
The product helps create the most natural possible appearance. The product forms the exterior
finish of a prosthesis. The product is not required for the proper and safe functioning of the pros­
thesis.
The functional shank is shaped by the O&P professional to create the most natural possible
appearance. Streaks, colour differences and small air pockets (up to 1 cm) in the functional
shank are concealed by the functional stocking. These differences, which are due to production
24
1. Sheath
2. Functional stocking (not included in the
scope of delivery)
3. Functional shank C-Leg / functional shank
Genium (referred to as "functional shank"
in the following)
4. Functional cosmesis C-Leg (knee part) /
functional cosmesis Genium (knee part)
(referred to as "functional knee part" in the
following)
English