Otto Bock 3F1-1 Instructions For Use Manual page 25

reasons, do not affect the function of the product and therefore do not constitute grounds for
complaints.
The functional stocking finishes the outside of the functional cosmesis. Various colours and sizes
are available.
Use the table in the quick reference guide to determine the size.
INFORMATION
Size L*
Size S of the functional stocking cannot be used due to the body height. Additional socket
volume has to be created for size L so the suspension of the functional stocking on the socket
can be ensured.
The sheath improves the sliding capability of the functional stocking.
2.3 Combination possibilities
This product can be combined with the following Ottobock components:
Knee Joint Combination Possibilities
• 3C98-3, 3C88-3 C-Leg
• 3B1-2, 3B1-2=ST Genium
Prosthetic Foot Combination Possibilities
• 1C60 Triton
• 1C61 Triton Vertical Shock
• 1C63 Triton Low Profile
• 1C64 Triton Heavy Duty
• 1C30 Trias
• 1D10 Dynamic foot
• 1D11 Dynamic foot
• 1M10 Adjust
• Terion K2: 1C11
• 1A30 Greissinger plus
• 1D35 Dynamic Motion
• 1C40 C-Walk
• 1E56 Axtion
• 1E57 Lo Rider
• 1B1 Meridium
• 1C66 Triton smart ankle
• 1C10 Terion
Adapter combination possibilities
• 4R57, 4R57=ST rotation adapter
Limited compatibility:
C-Leg: Collision with functional knee part from a tilt angle of 4.3° in the direction of the rotation
adapter button
Genium: Collision with functional knee part from a tilt angle of 3.2° in the direction of the rotation
adapter button
3 Application
3.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
The product serves to finish the prosthesis in the sense of restoring a natural appearance that is
as inconspicuous as possible.
25