Ford COUGAR 1968 Shop Manual page 877

PART 18-2
-
Seats
18-33
ER ASSEMBLY
-
C HOG RING (8 REQ'D)
D HOG RING (11 REQ'D)
66700 D 63341
FIG. 8-Typical Rear Seat Back Cover Installation
LATCH SPRING
BUSHING 62608
BUSHING 62608
SEAT BACK
.
.
-
. .
-
- -
SPRING ASSEMBLY
-
-
$0
.
NUT 374096-521
1
FIG. 9-Seat Back Latch Mechanism-Typical of Bench Seat
and install the receptacle assembly.
8. Install the seat back. to the seat
cushion.
REAR SEAT BACK COVER
I. Remove the rear seat back
from the vehicle.
2. Remove the hog rings retaining
the seat back cover to the frame and
remove the rear seat back cover.
3. Transfer the listing wires to the
new cover.
4. Position the new cover on the
pad and seat frame and secure it in
place with hog rings (Fig. 8).
5. Install the rear seat back in
the vehicle.
SEAT BACK L A T C H
All folding front seats and the se-
cond seat of three-seat station wagons
have a safety latch designed to hold
the seat back in place in the event of
an emergency stop or a crash situation.
For rear seat passenger entry and exit,
a handle on the side of the seat back
releases the safety latch.
If the seat back will not latch in po-
sition or the latch mechanism will not