Ford COUGAR 1968 Shop Manual page 771

PART 17-3
-
Front End, Bumpers, And Exterior Mouldings
1 7-29
SPACER 17A924
REAR BUMPER MPACT BAR 17906
MODEL 63 ONLY
I
LICENSE BRACKET
SUPPORT 13393
BOLT 17758
VIEW-A
BOLT 17758
FIG. 75-Montego ~ o d e ' l 63 and Fairlane Rear Bumper Installation
REINFORCEMENT 17A914
SEAL 40996 (2 REQD)
INNER ARM 17A971
>----+
SPACER 17A924
FIG. 76-Montego Rear Bumper lnstallation
-
Models 54, 65, and 76
3. Remove the four bumper-to- I N S r A L L A T I O N
mounting bracket retaining bolts and
remove the brackets (Fig. 17). 1. Position the license plate light
4. Remove the two license plate and bracket on the bumper and in-
light and bracket retaining screws stall the two retaining screws.
and remove the light and bracket. 2. Position the bumper mounting
brackets on the bumper and install
the bumper-to-mounting bracket re-
taining bolts.
3. Position the bumper assembly
to the vehicle. Start one bumper
bracket to body attaching bolt on