Table of Contents
Advertisement
(6) Connect the two MT-100 tables using the connect-
ing plate. Set the connecting plate between the
tables and attach it using four screws.
(7) Insert the bridge between the lower conveyor and
the lower left cover, and push it down into posi-
tion.
(8) Lock the casters on both MT-100 tables.
Wiring Between the QC-S30 and the QC-
S30F
(1) Remove a screw and the left receptacle cover on
the rear of the QC-S30. Mount the ground of sup-
port guide next to the connector using a screw.
(2) Attach solenoid connector A to the right connector
on the QC-S30F.
(3) Attach solenoid connector B to the connector on
the conveyor.
(4) Attach solenoid connector C to the left connector
on the QC-S30.
(5) Insert connector cables into the duct of the middle
conveyor.
How to Install Multiple QC-S30F Collators
Connecting Plate
Connector B
QC-S30F
Connector C
Connector C
QC-S30F
21098
50202R1
Support Guide
21098
50202S1
Support Guide
Ground
Left Receptacle
Cover
Washer
21098
50202T1
Connector A
21098
50202U1
Duct
Connector B
21098
50202V1
52
Advertisement
Chapters
Table of Contents
