Receiving Tray Full (Receiving Tray Full Lamp Lights On.) - Horizon Fitness QC-S30 Important Information Manual

Error Lamp Lights/Blinks
Receiving Tray Full (Receiving tray full lamp lights on.) : Receiving tray is full.
Check
Check whether the
receiving tray is full of
collated sets.
The receiving tray full icon appears although the receiving tray is not full
Check
Check whether collated
sheet is stuck on the rear
guide or backstop in the
receiving tray.
Check whether a strong
light source is affecting
the sensor beam func-
tion. (Check the upper
part of the receiving tray
on the front and rear.)
Check whether the
receiving tray full detect
sensor is covered with
dust.
25
Causes and Remedies
Remove the collated sets from the receiving
tray.
21098
40104B1
Causes and Remedies
Reposition the front/rear guide and the back-
stop in the receiving tray.
21098
40104C1
A strong light source can affect the sensor
beam function.
Change the direction of the collator to block
the light source so the light does not affect the
sensor.
21098
40104D1
Clean the receiving tray full detect sensor.
21098
40104E1
Page
Page 10
Page
Page 7,8
-
Page 35