Table of Contents
Advertisement
Operating Safety Precautions
Warning for Installation
Do not give many loads on one electrical outlet. This can cause a fire or an electrical shock.
Cautions for Installation
Do not install QC-S30 in a location where it will be exposed to direct sunlight, high temperature or
humidity.
Do not install the QC-S30 near any device which produces strong magnetic fields.
Do not install the QC-S30 in a location which is dusty. This can cause a fire or an electrical shock.
Do not install the QC-S30 in an unstable floor surface. This may allow the QC-S30 to fall over,
and this can cause severe personal injury. This can also affect the performance of the machine.
Warnings for Operation/Maintenance
Work alone when you do any operation.
Turn off the main power switch and unplug the power cord whenever you are cleaning the feed
rollers or friction pads.
Do not operate the machine with any of the covers removed. There are rotating mechanism and
sections with extremely high voltage inside the machine. These can cause severe personal injury
or an electrical shock.
Caution for Operation
After turning the power switch off, wait ten seconds before turning it on again. Otherwise, the cir-
cuit boards may be damaged.
III
Advertisement
Chapters
Table of Contents
