How To Staple Collated Sheets - Horizon Fitness QC-S30 Important Information Manual

How to Staple Collated Sheets

The collated sets can be stapled by connecting the finisher to the collator.
!
Explanation: Binding collated sheets using a finisher. (The sheet transport direction changes.)
Sheet loading order when using the SPF-9/SPF-9A
1st
2nd
20th
Control
10st
19
Top (1st)
2nd
3rd
c
Select
Press
Feed
Load sheets
in order from
the top bin.
1st 11st
2st 12st
3st 13st
4st 14st
5st 15st
6st 16st
7st 17st
8st 18st
9st 19st
10st
Prepare for the collating operation using the
finisher.
1) Load the sheets. Refer to the instructions at the bot-
tom of this page. (Load the sheets as shown in the
illustration. If the PS-P61 is connected, load the
sheets in the usual way.)
2) Raise the bin lever.
3) Turn on the main power switch. (When using two or
more collators, turn on the power switch from the left
side in order.)
21098
30601A1
Select the delivery mode.
Select the finisher (bottom icon) using the finisher/stacker
select button.
Set up the finisher.
• Set up the finisher. Refer to the operation manual for
your finisher.
Start the collating operation.
21098
30601B1
Sheet loading order when using the PS-P61
Feed
10th
9th
8th
7th
Load sheets in order from
6th
the bottom bin.
5th
4th
3rd
2nd
1st
10th
1st
2nd
21098
30601C1