Horizon Fitness QC-S30 Important Information Manual page 15

Start Collating
Press to stop.
Load
more
c
sheets.
!
!
Check the collated set.
• Count the number and check the page order of the set
on the receiving tray. If a sheet is missing or the page
order is not correct, press the Check button again and
then confirm the number and the page order of the col-
lated set.
21098
20301E1
Press the Start button.
• The collating operation starts.
• The display shows the number of collated sets.
• Press the Stop button to stop collating temporarily.
Press the Start button to start collating again.
• Refer to page 11 for instructions on entering the
number of sets to be collated.
21098
20301F1
• If the sheets in any bin run out, the collating operation
c
stops and the Error screen appears on the LCD display.
1) Lower the bin lever and load more sheets.
Blink
Quickly
2) Raise the bin lever.
3) Press the Start button again to start collating.
• When the current job is complete, if you change to a
new setup using different bins, check the new setup
using the Check button.
21098
20301G1
Additional
Information
Important
10