Horizon Fitness QC-S30 Important Information Manual page 17

c
!
c
!
Press
!
Press to stop.
Collated Sets
Backstop
Raise the bin lever.
• All bins are raised and set to the feed position.
21098
20301C1
Press the Check button
c
• One set of sheets will be collated and delivered to the
receiving tray. During this check, the machine saves the
sheet size and the number of bins used.
• After this operation, blue lamps on the operation panel
for the bins, which no sheets are loaded or misfeed
Blink
Quickly
occurs, blink quickly.
• The display shows "6."
21098
20301D1
Check the collated set.
• Count the number of sheets and check the page order
of the collated set on the receiving tray. If a sheet is
missing or the page order is not correct, press the
Check button to collate another set, then confirm the
number of sheets and the page order of the collated set.
Press the Start button.
Start Collating
• The collating operation starts.
• The number indicated on the counter is reduced.
• After collating six sets, the display shows "7" again, and
the operation stops.
21098
20301J1
Take out the collated sets.
• Pull the backstop up and lower it, and take out the col-
lated sets.
21098
20301H1
12