Horizon Fitness QC-S30 Important Information Manual page 54

How to Install Multiple QC-S30F Collators
3.
Install the conveyors on the QC-S30F.
Preparation for Multiple QC-S30F Collators
(1) Remove the rear cover from the unit.
(2) Remove the three screws and the gear cover.
Install the lower conveyor on the QC-S30F
(1) Remove the two locking screws on the bottom of
the lower conveyor
(2) Push in the lower conveyor so that the U-shaped
cutouts on the end of the lower conveyor fit over
the shaft on the QC-S30F.
• The tip of the stainless steel guide can bend
easily. Install the guide carefully.
Mount the middle conveyor on the QC-S30F
(1) Remove the locking screw on the middle con-
veyor.
49
CAUTION
Rear Cover
QC-S30F
QC-S30F
Positioning Shaft
Lower Conveyor
Projection
Locking Screw
21098
50202C1
Gear Cover
21098
50202D1
21098
50202E1
Stainless Steel Guide
21098
50202F1
Middle Conveyor
21098
50202G1