Transport Rollers And Transport Belt - Horizon Fitness QC-S30 Important Information Manual

Maintenance: Transport Rollers and Transport Belt
If there is dirt on the transport rollers or belt, the sheets may not be transported correctly.
Frequency: Once every 6 months
Lever
On the Machine
On the Door
Transport Belt
c
!
21098
40201A1
21098
40204A1
Transport Rollers
21098
40204B1
21098
40204C1
Cleaning the transport roller.
WARNING
Turn off the main power switch and unplug
the power cord whenever the transport
rollers are cleaned.
Turn off the power switch
• Turn off the main power switch on the QC-S30 and
unplug the power cord.
Open the transport door.
• Pull up the lever on the left side of the collator and
open the transport door.
Clean the transport rollers.
• Clean the transport rollers using a cloth with rubber
cleaner (XPF-111) while turning the rollers by hand.
CAUTION
When using rubber cleaner, wear rubber
gloves or clean your hands after the
cleaning operation.
Clean the transport belt.
• Clean the transport belt using a cloth with rubber
cleaner (XPF-111) while turning the belt by hand.
Close the transport door.
• Close the transport door completely after cleaning.
34