Sheet Jam (Blue Lamp Blinks Slowly.) - Horizon Fitness QC-S30 Important Information Manual

Sheet Jam (Blue lamp blinks slowly.) : Jamming occurs inside the collator.
Check
A sheet is jammed in the
transport section.
Check
whether paper
chips are left in the sheet
path.
The sheets in the bins
are bent, curled, or not
stacked correctly.
Check
whether the
sheets are held together
by static electricity.
Check whether the
sheets are held
together by ink.
Check whether the
transport rollers or
transport belts are
stained.
Check whether the
double feed detect sen-
sor is covered with
paper dust.
The transport door may
not be closed com-
pletely.
(When using two or
more collators)
Power switch on one of
the collator connected is
not turned on.
Causes and Remedies
Open the transport door and remove the
jammed sheets.
21098
40103A1
Open the transport door and remove the
paper chips.
21098
40103B1
Check whether the top sheet is stuck on the
Support
support roller.
Roller
21098
40103C1
Fan the sheets completely or let the sheets
sit for a while.
21098
40103D1
When using thick sheets, set the feed pres-
sure adjusting block to the strong position.
Strong
21098
40102B1
Clean the transport rollers or the transport
Clean
belts.
21098
40103E1
Clean the double feed detect sensor.
Clean
21098
40103F1
Close the transport door completely.
21098
40103G1
Make sure to turn on the power switch for all
collators connected in order from the left tower.
Power On
21098
40103H1
Error Lamp Lights/Blinks
Page
-
-
-
Page 5
-
Page 34
Page 33
-
9
24