Beckhoff EP3744-0041 Documentation page 75

Ethercat box with digital inputs, outputs and differential pressure inputs

Table of Contents

Fig. 57: Select file

Select the file (*.rbf) with the new FPGA firmware, and transfer it to the EtherCAT device.

Risk of damage to the device!

A firmware download to an EtherCAT device must never be interrupted! If this process is cancelled, the

supply voltage switched off or the Ethernet connection interrupted, the EtherCAT device can only be recom-

missioned by the manufacturer!

In order to activate the new FPGA firmware a restart (switching the power supply off and on again) of the

EtherCAT device is required.

Simultaneous updating of several EtherCAT devices

The firmware and ESI descriptions of several devices can be updated simultaneously, provided the devices

have the same firmware file/ESI.

Fig. 58: Multiple selection and firmware update

Select the required slaves and carry out the firmware update in BOOTSTRAP mode as described above.

EP3744-0041 and EP3744-1041

NOTE

Version: 2.2

Commissioning/Configuration

Table of Contents

Chapters

Table of Contents

Ep3744-1041