Mounting and connection
3.2
Connection
Druckluft
• Before connecting or disconnecting the module, check that the system is under pressure.
ð The compressed air connections must not be opened while the system is under pressure.
• The general safety and installation instructions for handling compressed air must be observed.
3.2.1
EtherCAT connection
For the incoming and ongoing EtherCAT connection,
• the EtherCAT Box (EPxxxx) has two M8 sockets, marked in green
• the Coupler Box (FBB-x110) has two M12 sockets
Fig. 11: EtherCAT Box: M8, 30 mm housing
Fig. 12: EtherCAT Box: M860 mm housing (example: EP9214)
18
CAUTION
Version: 2.2
EP3744-0041 and EP3744-1041