Troubleshooting - Siemens HB36D 72 Series Instruction Manual

Troubleshooting

Problem
The appliance does not work
The appliance cannot be started
The appliance will not start.
"Clean" or "Descale" appears on
the display
"Clock" is shown in the display
The appliance is not in
operation. A cooking time is p g
shown in the display
The display shows "Automatic
switch off"
All manuals and user guides at all-guides.com
Malfunctions often have simple explanations. Please
read the following instructions before calling the
after sales service.
Repairs may only be carried out by fully trained
after sales service technicians. Incorrect repairs may
present considerable risks for the user.
Possible cause
The plug is not plugged into
the mains
Power cut
Blown fuse
Faulty control
The appliance door is not fully
closed
The cleaning aid or descale
operation has been cancelled
Power cut
The rotary selector was
accidentally operated
The Start button was not
pressed after the setting had
been made
The Automatic switch off is
active
Notes/remedy
Connect the appliance to the
electricity supply
Check whether other kitchen
appliances are working
Check in the fuse box to make
sure that the fuse for the
appliance is OK
Switch the appliance off using the
fuse in the fuse box. Wait
approximately 10 seconds and
then switch it back on
Close the oven door
Rinse the appliance 2x (see
section "Cancelling the cleaning
aid" or "Cancelling descaling")
Reset the clock time
(see Time setting options section)
Press the Stop button
Press the Start button or delete
the setting with the Stop button
Press any button
53