Siemens HB36D 72 Series Instruction Manual page 49

Removing the remaining
water
Cancelling descaling
Descaling the evaporator
dish only
All manuals and user guides at all-guides.com
3. Press the Start button.
The appliance starts rinsing. "2nd rinse" appears in
the display. rinse".
After the second rinse, "Empty dish" appears.
4. Press the Stop button.
Remove the remaining water from the evaporator dish
using the cleaning sponge. Wipe out the cooking
compartment using the cleaning sponge and then dry
with a soft cloth.
1. Press and hold the Stop button.
Descaling is cancelled.
To ensure that no descaling solution remains in the
appliance, it must be rinsed twice after a cancellation.
2. Press the Start button.
"Empty dish and refill water tank" appears in the
display.
Proceed as described in the "1st rinse" section.
You can also use the Descale operating mode if you
do not wish to descale the whole appliance, but only
the evaporator dish in the cooking compartment.
Only difference:
1. Prepare a descaling solution by mixing 100 ml
water and 20 ml liquid descaler.
2. Completely fill the evaporator dish with descaling
solution.
3. Only fill the water tank with water.
4. Start the Descale operating mode as described.
You can also descale the evaporator dish manually,
without using the operating mode.
49