10 − Specifications, Etc; Analog I/O; Digital I/O - Tascam DV-RA1000HD Owner's Manual

Analog I/O

Balanced inputs
Connector:
Input impedance
Nominal input level
Maximum input level
Unbalanced inputs
Connector
Input impedance
Nominal input level
Maximum input level
Balanced outputs
Connector
Output impedance
Nominal output level
Maximum output level
Unbalanced outputs
Connector
Output impedance
Nominal output level
Maximum output level
Phones output (stereo)
Connector
Max output power

Digital I/O

PCM inputs (XLR)
Connector:
Signal type
Input frequencies (kHz)
Data format
Input impedance
Nominal input level
Minimum signal level
Intrinsic jitter
PCM inputs (RCA)
Connector:
Signal type
Input frequencies (kHz)
Data format
Input impedance
Nominal input level
Minimum signal level
Intrinsic jitter
10 − Specifications, etc.
3-pin XLR female x 2 (1: GND, 2: Hot, 3: Cold)
> 10 kΩ @ 1 kHz
+6 dBu (at max. +15 dBu), +4 dBu (at all other levels)
+15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu (switchable)
Unbalanced RCA pin jacks x 2
> 10 kΩ @ 1 kHz
–10 dBV
+6 dBV
3-pin XLR male x 2 (1: GND, 2: Hot, 3: Cold)
220 Ω
+6 dBu (at max. +15 dBu), +4 dBu (at all other levels)
+15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu (switchable)
Unbalanced RCA pin jacks x 2
220 Ω
–10 dBV
+6 dBV
1/4 " stereo jack (T = L, R = R, S = GND) x 1
80 mW + 80 mW (30 Ω)
3-pin XLR female x 2 (1: GND, 2: Hot, 3: Cold)
IEC-60958-4, AES-3-1992
44.1/48, 88.2/96 (double-speed or double-wire), 176.4/192 (double-speed + double-wire)
all ±6%
16-bit (44.1 kHz, CD-DA), 24-bit (PCM recording to DVD±RW or HD)
110 Ω ±20%
2–7 Vpp
200 mVpp
<0.025UI (4 ns @ 48 kHz)
RCA (pin) jack x 1
IEC-60958-3
44.1/48, 88.2/96 (double-speed ), all ±6%
16-bit (44.1 kHz, CD-DA), 24-bit (44.1 kHz/48 kHz, 88.2/96 kHz to DVD±RW or HD)
75 Ω ±20%
0.5 Vp-p
0.2 Vp-p
<0.025UI (4 ns @ 48 kHz)
1
TASCAM DV-RA1000HD