About Marks; Dvd±Rw Hd; Jumping To A Mark; Editing Marks - Tascam DV-RA1000HD Owner's Manual

About marks

DVD±RW
A maximum of 99 marks can be added to a disc (CD) or
to a project (DVD±RW/HD) to help with location, etc.
These marks can be edited.
NOTE
• Although marks can be added to a CD recording
project (or to a pre-recorded CD), they are not
stored when the CD is ejected.
• Marks can be stored on a DVD or in the HD as
information. Note, however, that the marks will
not be saved if you do not write the UDFMI to the
disc. (See "Writing the UDFMI" on page 0.)
• You do not need to write the UDFMI manually in
an HDD project.
• Press the key to add a mark at the
MARK
point where the key was pressed. "
" appears for a second to let you
mark!
know the mark has been set.
• Marks can be added when stopped, paused,
playing back or recording.

Jumping to a mark

• To jump to a location mark, use the
dial to highlight it in the list, and
JOG/DATA
press .
ENTER

Editing marks

• From the locate list, use
editing the currently-highlighted mark.
Figure 5.9: Editing a mark
• Use the cursor keys to highlight the time
fields and the
JOG/DATA
fields, to slip the position of the mark.
5 − CD playback & recording
HD
Set
and to start
F3 F4
dial to edit these
• Pressing and holding the
then pressing the
MARK
locate list screen.
• Use the dial to scroll through the
JOG/DATA
list. Marks are displayed in the order they
appear in the play list (DVD/HD). If the
play list order changes, so does the mark list
order.
Figure 5.8: The locate list
NOTE
The key on the RC-RA1000 remote control
MARK
unit can be used to enter marks, and the
key can be used to bring up the locate list.
NOTE
This function is available for DVD±R discs.
• Press when the editing is complete.
ENTER
The mark is then highlighted, and you can
use it for location.
• Use ( ) to delete the highlighted mark
DEL
F1
from the list.
CAUTION
• If you do not write the UDFMI information to disc,
the marks will not be saved. (See "Writing the
UDFMI" on page 0.)
• If you change the mark position, the locate list
will be automatically updated and sorted by time.
• If you set a mark to a position beyond the end of
the track, the mark will automatically be placed
at the end of the track when you press the
key.
key and
DISPLAY
key brings up the
LOCATE
ENTER

TASCAM DV-RA1000HD