Download Print this page
Tascam DV-RA1000HD Release Notes
Tascam DV-RA1000HD Release Notes

Tascam DV-RA1000HD Release Notes

Dv-ra1000hd ver 2.04 release notes
Hide thumbs Also See for DV-RA1000HD:

Advertisement

Quick Links

Updates
Always use the most recent firmware for this device.
Please visit the TASCAM web site at http://www.tascam.
com to check for the latest firmware.
Note about printable discs
The explanation about printable discs on page 10 of the
Owner's Manual has been revised as follows.
(Before revision)
Using commercially available CD stabilizers or printable
recordable discs with this player will damage the
mechanism and cause it to malfunction.
(After revision)
Never use commercially available CD stabilizers with
this player. When using a printable recordable disc with
this player, only use a disc before its label side has been
printed. Using a disc after its label side has been printed
could cause it to become unbalanced due to the slight
weight of the ink, and this could lead to poor data-
recording quality.
New functions
V2.04 additions
In order to prevent file fragmentation, recording can
no longer be continued when the remaining open
capacity of the hard disk drive is less than 1 GB.
Delete projects and tracks to increase the open
capacity in order to continue recording.
Victor/JVC DVD-RW 4x discs are now supported.
D01126920A
DV-RA1000HD
Maintenance items
V2.04 changes
NOTE
For information about "COPY ID", see "Copy protection" on
page 37 of the Owner's Manual.
NOTE
See "The check screen" on page 26 of the Owner's Manual for
instruction about how to check the Drive. Ver.

Checking the firmware version

Check the firmware version for your DV-RA1000HD unit
before beginning to update the firmware.
1 Turn the unit power on.
2 Press the MENU key to open the
3 Use the JOG/DATA dial to select
4 Use the JOG/DATA dial to select
5 There is no need to update if the number to the
Release Notes
When the remaining hard disk drive capacity became
low, the unit would hang up during recording on rare
occasions. This issue has been corrected.
The "COPY ID" setting has been made effective when
making an audio CD from the hard disk (HDD to CD).
Recording quality has been improved with Mitsubishi
Kagaku Media (Verbatim) DVD+R 16x discs. (This was
only a problem with units using Drive. Ver. T.0H and
T.0J.)
After making an audio CD from the hard disk (HDD
to CD), the home screen would not reopen and the
unit would hang up on rare occasions (This was only a
problem with units using Drive. Ver. T.0H and T.0J.) This
issue has been corrected.
open the
screen
SYSTEM SETUP
the ENTER key.
right of "
" is the same or newer than the
Ver.
version that you were planning to use to update.
screen.
MENU
and
SYSTEM SETUP
and press
CHECK
1
TASCAM DV-RA1000HD

Advertisement

loading

Summary of Contents for Tascam DV-RA1000HD

  • Page 1: Checking The Firmware Version

    Drive. Ver. New functions Checking the firmware version V2.04 additions Check the firmware version for your DV-RA1000HD unit before beginning to update the firmware. • In order to prevent file fragmentation, recording can no longer be continued when the remaining open 1 Turn the unit power on.
  • Page 2: Updating The Firmware

    ENTER key. Updating should take about one minute. (5) When updating completes, the following pop-up message appears and the tray opens. Remove the updater CD from the tray, and press the POWER switch to turn the power OFF. TASCAM DV-RA1000HD...