The Virtual Front Panel (Vfp) - Tascam DV-RA1000HD Owner's Manual

The virtual front panel (VFP)

The DV-RA1000HD allows access to many functions
through the virtual front panel, providing a graphical
representation of many of the keys and controls that
might be hardware switches on other units.
Note that many of these functions are hardware keys on
the remote control unit.
To launch the virtual front panel
1
From the home screen, press the
The virtual front panel appears.
There are four types of the virtual front panel:
" PLAY ", " REC ", " CD ", and "
• Press to exit the virtual front panel
CANCEL
and return to the home screen.
2
Press the function key (
to the tab on the bottom of the screen to display
the desired panel.
Figure 4.5: Virtual front panel (PLAY)
Figure 4.6: Virtual front panel (REC)
Figure 4.7: Virtual front panel (CD)
Figure 4.8: Virtual front panel (etc.)
key.
ENTER
etc. "
- ) that corresponds
F1 F4
4 − Basic operations
Each panel features the switches to which various
functions are assigned.
3
Rotate the
JOG/DATA
panel.
4
Use the ( ) key or
PUSH
F5
selected switch.
If a switch just toggles between on and off, a
mark appears above the switch when the switch
is turned on, and a
switch when the switch is turned off.
NOTE
• In this manual, the procedure of selecting a
switch in the virtual front panel and pressing the
key is referred to as "pressing a switch."
F5
• Some switches, when pressed for at least one
second, present a menu of choices, but others
just toggle between on and off.
Play page
(auto-ready)
Is used to switch auto-ready play-
ARDY
back mode on and off. (See "Auto ready" on page 32.)
(single)
Turns single-track playback mode on and
SNGL
off. (See "Single track playback" on page 31.)
NOTE
The single play function cannot be used with the
repeat function. If either the single play or repeat
function is enabled, it is disabled when the other
function is enabled.
(auto-cue)
Turns the auto-cue function on and
ACUE
off. (See "Auto cue" on page 32.)
(repeat)
RPT Sets the playback repeat mode between
(off), (all tracks of the disc are repeated)
OFF ALL
and (the current track is repeated). (See "Repeat
1Tr
playback" on page 31.)
(auto-space)
ASPC Turns the auto-space function on
and off. (See "Auto space playback" on page 31.)
(program)
Turns programmed playback on and
PGM
off, and allows setting of the programmed playback
mode. (See "Programmed playback" on page 30.)
(fade)
FADE Turns the fade playback on and off. (See
"Fades" on page 33.)
Rec page
(auto-track)
ATRK Turns the auto track function on
and off when recording. (See "Auto track increment" on
page 34.)
dial to select a switch in the
key to press the
ENTER
mark appears above the

TASCAM DV-RA1000HD