Specifications; Ratings; Input/Output Ratings; Audio Performance - Tascam DR-10L Owner's Manual

Specifications

Ratings

8 Recording media
microSD card (64 MB - 2 GB)
microSDHC card (4 GB - 32 GB)
8 Recording/playback formats
44.1/48kHz 16/24-bit, mono/poly BWF

Input/output ratings

8 Analog input
Mic jack
Connector: 1/8" (3.5mm) mini TRS jack (with screw lock)
Microphone sensitivity: –42 dBV/Pa
Maximum input sound pressure: 115 dB SPL
Maximum input level: –15 dBu (Gain L)
Minimum input level: –55 dBu (Gain H+)
Microphone input gain: 14 dB to 38dB
Input impedance : 33KΩ (Mic bias off )
: 2KΩ(Mic bias on)
8 Analog output
Headphones jack
Connector: 1/8" (3.5mm) stereo phone (dual mono audio output)

Audio performance

8 IN q PHONES (input monitoring output, 10kΩ load)
Frequency response: 20 Hz - 22 kHz +1/−2 dB
Distortion: 0.05% (1kHz sine wave, at maximum input level)
S/N ratio: 88 dB or higher (PHONES volume max, MIC GAIN L selected)
20
TASCAM DR-10L

General

8 Power
1 AAA battery (alkaline, NiMH or lithium)
USB bus power from a computer
8 Power consumption
0.45 W (maximum)
8 Current consumption（USB bus power)
0.25A (maximum)
8 Battery operation time (continuous operation)
Using an alkaline battery (EVOLTA)
Format Operation time Note
About 10.0
Recording 48kHz/24-bit WAV
hours
Recording 48kHz/24-bit WAV About 9.5 hours
Mic connected
Headphones not connected
Mic bias: off
Limiter: off
Dual recording: off
File type: mono
Mic connected
Headphones not connected
Mic bias: on
Limiter: off
Dual recording: off
File type: mono