Audio Performance; Physical, Etc. Specifications - Tascam DV-RA1000HD Owner's Manual

CONTROL I/O (serial) connector
Connector
Control protocol
Communication protocol
REMOTE IN (from RC-RA1000)
Connector
KEYBOARD
Connector
Compatibility
a. Contact your TASCAM distributor for full details of how to use this connector if you wish to implement remote
control.

Audio performance

These figures all measure analog-to-analog performance.
Frequency response
All modes
at 40 kHz –1 dB (±1 dB)
at 50 kHz –3 dB (±1 dB)
at 70 kHz –3 dB (+1 dB/–2 dB)
Total Harmonic Distortion (typical)
PCM, DSD
Signal-to-noise ratio (typical)
ADC
DAC
Crosstalk
Click noise
Difference between channel levels

Physical, etc. specifications

Voltage requirements
Power consumption
Dimensions (w x h x d)
Weight
Operating temperature
10 − Specifications, etc.
'D'-sub 9-pin female
TASCAM optical disc control protocol
RS-232C
2.5 mm stereo mini-jack
Standard PS/2 mini-DIN connector
101-key (US) keyboard or 106-key (Japanese) PS/2 keyboard
20 Hz — 20 kHz (±0.5 dB)
Fs = 88.2/96 kHz
DSD mode
Fs=176.4/192 kHz
0.004% (f=1 kHz, AES-17LPF, AD to DA)
110 dB (A-weighting, AES-17LPF, DVD recording)
120 dB (A-weighting, AES-17LPF, DVD recording)
>97 dB, f=1 kHz, AES17-LPF, DVD±RW/HD recording
<0 dB = –16 dBFS
<1.0 dB, 1 kHz, 0 dBFS
AC100-240 V, 50/60 Hz
33 W
483 x 95 x 357 (mm)
19 x 3.75 x 14.1 (in)
6.8 kg (15 lbs), excluding remote control unit
5°C to 35°C (41°F to 95°F)
a
TASCAM DV-RA1000HD