Changing The Current Project; Changing The Name Of A Project; Deleting A Project From Disc; Formatting A Disc - Tascam DV-RA1000HD Owner's Manual

6 − DVD±RW/HD playback & recording
3
Use the soft keys and
tached PS/2 keyboard) to enter the text. (See
"Naming files, projects, marks, etc." on page 29.)
You can add more lines to the notes than you
can see on screen and scroll up and down to view
them.
4
Press and hold
ENTER
the project text (brief presses of

Changing the current project

1
Select the PROJECT sub-menu from the main menu.
2
Highlight the OPEN sub-menu to show a list of the
names of all projects on the disc, together with
their sampling frequencies.
The current project is shown with an arrow be-
side the name.

Changing the name of a project

1
Select the PROJECT sub-menu from the main menu.
2
Highlight the sub-menu to show a list of the
OPEN
names of all projects on the disc, together with
their sampling frequencies (see Figure 6.6, Load-
ing a project).
The current project is shown with an arrow be-
side the name.

Deleting a project from disc

1
Select the sub-menu from the main menu.
PROJECT
2
Highlight the OPEN sub-menu to show a list of the
names of all projects on the disc, together with
their sampling frequencies.
The current project is shown with an arrow be-
side the name (see Figure 6.6, Loading a project).

Formatting a disc

When a disc that has already been used is formatted, a
new project is automatically added to the disc.
Reformatting a DVD±RW disc on the DV-RA1000HD
will never result in an entirely blank disc (but of course,
all previous data is removed during a format process).

TASCAM DV-RA1000HD
dial (or an at-
JOG/DATA
for a second or so, to store
add a
ENTER
carriage return). Press and hold
without saving (brief presses of
delete key).
NOTE
Remember that this text will not be stored on
DVD±RW until you write the UDFMI. (See "Writing
the UDFMI" on page 0.)
Figure 6.6: Loading a project
3
Use the dial to move the cursor to the
JOG/DATA
project to be loaded, and press
lected project is then loaded (the sampling fre-
quency is automatically changed).
3
Use the dial to move the cursor to the
JOG/DATA
project to be renamed, and press either the
key.
F4
You can then edit the name of the project as
explained in "Naming files, projects, marks, etc."
on page 29.
4
Press when done.
ENTER
3
Press the ( ) key to delete the highlighted
ERASE
F1
project. You are asked to confirm the deletion.
Press to delete, or
ENTER
operation.
All files in the project will be deleted along with the
project itself.
CAUTION
If you attempt recording many times to the same
DVD±RW disc and erasing or formatting it often,
you may find that it does not record properly. You
should use a new disc for any really important re-
cordings.
to exit
CANCEL
act as a
CANCEL
. The se-
ENTER
or
F3
to cancel the
CANCEL