Other Connections - Tascam DV-RA1000HD Owner's Manual

10 − Specifications, etc.
DSD inputs (BNC)
Connector
Signal type
Signal level
Input impedance
Clock synchronization
PCM outputs (XLR)
Connector:
Signal type
Output frequencies (kHz)
Data format
Output impedance
Nominal output level
Intrinsic jitter
PCM outputs (RCA)
Connector:
Signal type
Output frequencies (kHz)
Data format
Output impedance
Nominal output level
Intrinsic jitter
DSD outputs (BNC)
Connector
Signal type
Signal level
Output impedance
Clock synchronization

Other connections

WORD SYNC IN
Connector
Input voltage
Input impedance
WORD SYNC OUT
Connector
Input voltage
Input impedance
Sampling frequencies (kHz)
WORD SYNC THRU
Connector
Output voltage
Output impedance
USB 2.0

TASCAM DV-RA1000HD
BNC connectors x 2
Sony SDIF-3 format / DSD-Raw
2 V to 5 V (equivalent to 5V TTL)
75 Ω, ±10%
Must be synchronized to 44.1 kHz at WORD SYNC IN or use internal clock at 44.1 kHz
3-pin XLR male x 2 (1: GND, 2: Hot, 3: Cold)
IEC-60958-4, AES-3-1992
44.1/48, 88.2/96 (double-speed or double-wire), 176.4/192 (double-speed + double-wire)
all ±6%
16-bit (44.1 kHz, CD-DA), 24-bit (PCM recording to DVD±RW or HD)
110 Ω ±20%
2–5 Vpp
<0.025UI (4 ns @ 48 kHz)
RCA (pin) jack x 1
IEC60958-3
44.1/48, 88.2/96 (double-speed ), all ±6%
16-bit (44.1 kHz, CD-DA), 24-bit (44.1 kHz/48 kHz, 88.2/96 kHz to DVD±RW or HD)
75 Ω ±20%
0.5 Vpp (typical)
<0.025UI (4 ns @ 48 kHz)
BNC connectors x 2
Sony SDIF-3 format / DSD-Raw
2 V to 5 V (equivalent to 5V TTL)
10 Ω
Must be synchronized to 44.1 kHz at WORD SYNC IN or use internal clock
BNC
5 V TTL equivalent
75 Ω ±10%, with THRU automatically engaged
BNC
5 V TTL equivalent
< 10 Ω
44.1, 48, 88.2, 96, 176.4, 192 (PCM) / 44.1 (DSD)
BNC
5 V TTL equivalent
< 10 Ω
USB 2.0 Hi-speed Female B-type connector for connection to personal computer