Effect Libraries; Recalling Library Data; Storing Library Data - Tascam DV-RA1000HD Owner's Manual
High definition audio master recorder
Hide thumbs
Also See for DV-RA1000HD:
- Specification (27 pages) ,
- Technical documentation (4 pages) ,
- Supplemental manual (2 pages)
Table of Contents
Advertisement
The slowest slope is set by the value "
: The output level of the signal processed
•
GAIN
by the compressor/expander.
: The time the processed signal takes
•
ATTACK
to achieve the specified ratio after the input
signal exceeds the threshold (compressor) or
falls below the threshold (expander).
Effect libraries
The DV-RA1000HD effect libraries, located on the HD,
enable you to store and recall effect (EQ and dynamics)
settings that can be shared by all projects.
The EQ library and dynamics library each feature a
preset library that stores preset data and a user library
that can store user-defined settings.
Recalling library data
Follow the steps below to recall stored preset data or
user data.
1
While the EQ setting screen (or dynamics setting
screen) is displayed, press and hold the
key for at least one second.
The DV-RA1000HD displays the EQ library
screen (or dynamics library screen).
Figure 8.5: EQ library screen
Storing library data
You can store the current effect settings as user data.
1
While the EQ setting screen (or dynamics setting
screen) is displayed, press and hold the
key for at least one second.
The DV-RA1000HD displays the EQ library
screen (or dynamics library screen).
NOTE
To return to the EQ setting screen (or dynamics set-
ting screen) while the EQ library screen (or dynamics
library screen) is displayed, press the
."
•
5
6
Use
and off.
7
Press
The EQ and dynamics libraries are each divided into
two categories: a preset library that contains preset
data, and a user library that can store user-defined set-
tings. The EQ library and dynamics library can each
store up to 99 sets of preset or user library data.
ENTER
NOTE
To return to the EQ setting screen (or dynamics set-
ting screen) while the EQ library screen (or dynam-
ics library screen) is displayed, press the
key.
2
Move the cursor to the desired library data you
want to recall.
3
Press the
The DV-RA1000HD applies the recalled library
data to the effect parameters, then displays the
EQ setting screen (or dynamics setting screen).
2
Move the cursor to the library data location to
which you want to store the current settings.
ENTER
NOTE
You cannot store the settings to the preset data
location.
3
Press the
The DV-RA1000HD stores the current parameter
settings as the selected library data, then dis-
plays the EQ setting screen (or dynamics setting
key.
screen).
CANCEL
8 − Effects
: The time the processed signal takes
RELEASE
to return to unprocessed after the input sig-
nal falls below the threshold (compressor) or
exceeds the threshold level (expander).
(
) to turn the dynamics processor on
SW
F4
to confirm these settings.
ENTER
Figure 8.6: Dynamics library screen
(
) key.
LOAD
F2
(
SAVE
) key.
F1
TASCAM DV-RA1000HD
CANCEL
Advertisement
Table of Contents
