Cd Playback & Recording; Playback; Basic Playback Operation Dvd Hd; Display Dvd Hd - Tascam DV-RA1000HD Owner's Manual

5 − CD playback & recording
Basically, the DV-RA1000HD works in the normal way
as a CD player and in a very similar way to many CD
recorder.
However, there are a number of features that may not be
immediately obvious.
Functions marked with a
chapter are available for DVD or HD playback respec-

Playback

The following apply when the DV-RA1000HD is used
to play back CD, CD-R or CD-RW discs. Many of these
Basic playback operation
The transport keys enable you to play a disc as if you
were using a standard CD player.
• To start playback, press the
the transport section is stopped or playback
is paused.
• To stop playback, press the
• To pause playback, press the
To resume playback after the playback is
paused, press the
PLAY
• To mute the playback signal (i.e., silent play-
back), press the
MUTE
key briefly to mute the signal. Press the
Display
DVD HD
Use the key on either the main unit or the
DISPLAY
RC-RA1000 remote control unit to cycle through track
elapsed time, track remaining time, total elapsed time,
and total remaining time (on playback).
Programmed playback
To program the order of track playback, use the pro-
gram list accessible from the Virtual Front Panel. (See
"The virtual front panel (VFP)" on page 23.) The
key on the remote control unit can also be used to
access this screen and turn programmed playback on
and off.
The order of programmed playback is not stored when
power is turned off.
When programmed playback is turned on, the screen
shows a list of tracks which can be edited as follows:
0
TASCAM DV-RA1000HD
or indicator in this
DVD HD
DVD HD
key while
PLAY
key.
STOP
key.
READY
key.
key. Press the
MUTE
DVD HD
PGM
tively. Functions marked with a
available for DVD±RW or HD recording respectively.
refers to both DVD±RW and DVD±R, and
DVD
refers to the HD of DV-RA1000HD.
Certain functions are not available in DSD mode, and
this is noted in the corresponding sections.
features also apply to playback of DVD and HD record-
ed on the DV-RA1000HD.
key again to unmute the signal. Press
MUTE
and hold the
MUTE
until you release the key. Release the
key to unmute the signal. While the signal is
muted, the key indicator lights up.
MUTE
• To skip the tracks backward or forward,
press the / keys.
• To perform cue search during playback,
press and hold the
panel or the /
trol unit. You will hear an intermittent fast
playback sound at a very low volume.
While recording, track elapsed time and recording
remaining time are the only options available.
In stopped mode, the choices are track elapsed time,
track remaining time, total time, total remaining time
(and recording remaining time on recordable discs).
Figure 5.1: Programmed playback
• Use the dial to scroll through the
JOG/DATA
list of tracks at the left of the screen.
• Add tracks to the end of the program list
using the ( ) key.
ADD
F1
or are
DVD±RW HD
HD
key to mute the signal
MUTE
/ keys on the front
keys on the remote con-