5 − CD playback & recording
Finalizing discs
When recording has taken place on a CD-R or CD-RW
disc, the TOC must be written to allow the disc to be
played on ordinary CD players.
Press the on-screen
FINALIZE
Panel (see "The virtual front panel (VFP)" on page 23)
to bring up a pop-up message.
Press
to finalize the disc, or
ENTER
to the VFP.
Unfinalizing discs
This is the opposite of finalizing—removing the TOC
to allow more tracks to be added (subject to the space
available on the disc).
This is only possible with CD-RW discs, of course.
To unfinalize a disc, press the on-screen
in the Virtual Front Panel (see "The virtual front panel
(VFP)" on page 23) to bring up a pop-up message.
Erasing discs (CD-RW)
CD-RW discs can be erased and reused using the erase
function available from the VFP.
To erase a disc, press the on-screen
the Virtual Front Panel (see "The virtual front panel
(VFP)" on page 23) to select either a full erase of the
disc (
) or a faster erase (
Full Erase
) process and bring up a pop-up message.
Erase
TASCAM DV-RA1000HD
switch in the Virtual Front
to return
CANCEL
UNFINAL
switch
switch in
ERASE
Fast
The screen shows an appropriate message while final-
ization is taking place (about a minute). No cancellation
is possible until the finalization is complete.
NOTE
This function may also be accessed through the
dedicated
key on the RC-RA1000.
FINALIZE
Press
to unfinalize the disc, or
ENTER
return to the VFP.
The screen shows an appropriate message while the
disc is being unfinalized (about a minute).
NOTE
This function may also be accessed through the
dedicated
key on the RC-RA1000.
UNFINALIZE
Press
to erase the disc, or
ENTER
the VFP.
NOTE
The Fast Erase process removes only the TOC, but
not the entire data.
to
CANCEL
to return to
CANCEL