10 - Using The Remote Jack; Using A Footswitch (Tascam Rc-3F); Setting Up The Footswitch; Using The Footswitch - Tascam DR-701D Reference Manual

This unit has a REMOTE jack.
Connect a TASCAM RC-3F footswitch or TASCAM RC-10 wired
remote control (both sold separately) here to enable remote
operation of this unit.

Using a footswitch (TASCAM RC-3F)

TASCAM RC-3F (sold separately)

Setting up the footswitch

1. On the page, select the
REMOTE
"Menu operation procedures" on page 12)
2. Set the item to
CONTROLLER
3. Select the item and set the footswitch mode.
MODE
MODE
L C
PLAY/
PLAY REW
STOP
REC 1 STOP REC
REC 2 STOP REC
4. When finished, press the MENU button to return to the
Home Screen.

Using the footswitch

Press the pedals of the footswitch to use the operations
assigned to them on the
REMOTE
10 – Using the REMOTE jack
item. (see
CONTROLLER
(default).
RC-3F
Footswitch
R
FWD
INC
(file incrementation function)
SLATE
page.
Using a remote control (TASCAM
RC-10)
TASCAM RC-10 (sold separately)

Setting up a remote control

1. On the page, select the
REMOTE
"Menu operation procedures" on page 12)
2. Set the item to
CONTROLLER
Function buttons
F1 F2
Backlight
Always ON/
SLATE
Backlight
OFF
3. When finished, press the MENU button to return to the
Home Screen.

Using the remote control

Press the function (F1–F4) buttons on the TASCAM RC-10
remote control to use the operations assigned to them on the
page.
REMOTE
item. (see
CONTROLLER
(default: RC-3F).
RC-10
F3 F4
MONITOR MONITOR
SELECT + SELECT −
39
TASCAM DR-701D