Jog Playback Dvd Hd; Pitch Change Dvd Hd; Auto Cue Dvd Hd; Auto Ready Dvd Hd - Tascam DV-RA1000HD Owner's Manual

5 − CD playback & recording
Jog playback
DVD
You can use the
JOG/DATA
position backwards and forwards.
• Press and hold the
key.
PLAY
• Both keys flash. You can now use the
dial to move the play position back
JOG/DATA
and forwards through the current track/file.
• Press the key alone to exit from the
READY
jog mode, and leave the playback position at
the position selected with the
Pitch change
DVD
This is another VFP function (see "The virtual front
panel (VFP)" on page 23) for playback only.
The reference clock must be set to the internal clock for
this feature to operate.
Move the cursor to the PITCH
briefly to turn on pitch change.
Press and hold for about a second to enter the
ENTER
pitch change setting screen:
Auto cue
DVD HD
When the auto cue function is turned on, cueing the
playback position to the beginning of a track will locate
and pause at the first point in the track at which the
audio rises, rather than the top of the track. "The point
at which the audio rises" refers to the first point in a
track at which the audio signal rises above the speci-
fied threshold. (See "Setting the sound threshold level
( )" on page 35.)
SOUND LEVEL
This feature can be used together with the auto ready
function. (See "Auto ready" below.)
Auto ready
DVD HD
This automatically cues up the playback position to the
start of the next track after a track has been played and
puts the DV-RA1000HD into the ready position (the
key lights).
READY

TASCAM DV-RA1000HD
HD
dial to jog the playback
key and press the
READY
dial.
JOG/DATA
HD
switch and press
ENTER
Press the key to stop playback and
STOP
cancel the jog mode. If the resume function
has been turned on, playback is stopped at
the point at which you pressed the
Press the key to resume normal play-
PLAY
back from that point.
• You can also use the
RC-RA1000 remote control unit as jog keys.
NOTE
This feature cannot be used in DSD mode.
Figure 5.2: Pitch control
Use the and keys to navigate, and the
F1 F2
dial to set the value of the pitch (and speed) up to ±6%
away from nominal.
Press to make the setting.
ENTER
NOTE
• Note that this function is not available on DVDs
recorded in DSD mode.
• If the audio signal in a track does not exceed
the specified threshold level, the top of the track
will be located and the transport section will be
paused.
Use the Virtual Front Panel (see "The virtual front
panel (VFP)" on page 23) ACUE
control unit's key to turn this function on or off.
A.CUE
It can be combined with the Auto cue function (see
"Auto cue" above) to position the playback at the start
of the recorded material.
NOTE
This feature can also be used with DVD playback.
key.
STOP
keys on the
JOG/DATA
JOG/DATA
function or the remote